SL Enterprises SolarSL Enterprises

SLE Solar Catalog



Home: SLE Solar Catalog: Batteries:

Battery Analyzer
The 390PT is a fast, safe analyzer for 6- and 12-volt batteries as well as 24-volt systems.

Cat. No. MT-390PT
Weight 1 lbs

Battery CableCap Stud Insulators
Insulate stud type connectors on alternators, starters, windlasses and other high amperage devices

Cat. No. BS-CC
Weight 1 lbs

Battery Cap - Bayonet Style Vent Caps
Fits all Exide Technologies, Dyno, Enersys, Hawker, East Penn (Deka), Crown, Trojan, Surrette, Superior, Bulldog, Industrial Battery Engineering (IBE), US Battery, Arrow Battery and Douglas Batteries.

Cat. No. WM-1050
Weight 0.5 lbs

Battery Cap - Econ-O-Flip
Enginnerd and Designed for Ease of Inspection, Servicing and Watring and Ecompasses Flip-Top Orientation Through 360 Degrees

Cat. No. WM-2050-PH
Weight 0.5 lbs

Battery Cap - Hydro Caps For T105 & L-16
Hydro Cap combine the release oxygen and hydrogen which reduces the water loss.

Cat. No. JDTC
Weight 0.5 lbs

Battery Cap - R+ Recombination Cap
R+ Recombination Caps are able to catalytically recombine the hydrogen and oxygen gasses into pure water that returns to the battery cell.

Cat. No. SWI-209018
Weight 0.5 lbs

Battery Cap - Water Miser Vent Cap
Engineered and Designed to encompass all area of concern - Ease of Inspection and Watering. Battery-top Mositure Recuction, Electrolyte Retention within Cells, Exteded Watering Invervals, Fumer-Freer Environment, As well as Flame and/or Spark reardant

Cat. No. WM-2000-PH
Weight 0.5 lbs

Battery Desulphator
Sulphite crystals form when the battery charge is reduced and/or the discharge/ discharge cycles are not well suited for the battery. These sulphite crystals act as insulators to the flow of electricity in the battery, seriously degrading the capability o

Cat. No. SC-BD-2
Weight 2 lbs

Battery Master Switches
Unique to the Contour and House Battery Master Switches is the patented contour lock system

Cat. No. 701xxRV
Weight 2 lbs

Battery Power Solutions - Desulfators
The BLS 12-A from Battery Power Solutions is for use on vehicles that are used frequently and have one or more batteries. Also for use with a battery bank that operates at 12 volts.

Cat. No. AEE-BLS-45.0716x
Weight 5 lbs

Battery Standard CableCaps
For batteries with marine adaptor terminals added on

Cat. No. BS-SC
Weight 1 lbs

Battery Switch-Panel Mount
Panel mount range of battery switches are designed specifically for panel mount applications

Cat. No. BEP-701-PM
Weight 1 lbs

Battery Terminal Anti-Corrosion Rings
Fit top and side battery posts.

Cat. No. ANCOR-260405
Weight 0.01 lbs

Battery Terminal Boots
Battery Terminal Boots

Weight 1 lbs

Battery Terminal Cleaner
Battery Terminal Cleaner

Cat. No. ANCOR-700103
Weight 0.5 lbs

Battery Terminals Lead
100% tin plated copper resists corrosion from salt and moisture.

Weight 1 lbs

Battery Terminals Tinned Copper
ANCOR battery terminals are 100% tinned plated and do not come loose or lose conductivity like lead terminals.

Weight 2 lbs

Charging Battery Desulphator
This unit is a 3 amp charge controller married with a battery desulphator. It is used to recover a a badly sulphated battery or to maintain a battery in storage for a significant time.

Cat. No. SC-BD-10
Weight 4 lbs

Contour Heavy Duty Master Switch
The Contour Heavy Duty Master switch is rated at 600 Amps continuous and 2500 Amps cranking

Cat. No. BEP-720RV
Weight 2 lbs

Digital Battery Analyzer
Analyzes 12 volt and 6 volt lead-acid batteries of all types: flooded, gel-cell or AGM; deep-cycle or gen/engine start

Cat. No. K-497-0400-5
Weight 2 lbs

Dual Operation VSS (Voltage Sensitive Switch) HD Optic 12/24V 500A MC6
Dual Operation VSS (Voltage Sensitive Switch) HD Optic 12/24V 500A MC6

Cat. No. BEP-720-MDVSO
Weight 2 lbs

Easyfit Battery Switch 700
The 700 Easyfit achieves this through an easily removable threaded ring allowing for panel thicknesses up to 19mm (3/4”).

Cat. No. BEP-700
Weight 1 lbs

EasyFit™ Battery Switch
ParkPower® has listened to its customers and has responded to feedback concerning some installations where switches need to be recessed through varying thicknesses of panels.

Cat. No. BEP-700RV
Weight 2 lbs

Heavy Duty Battery Switch
It fits into the same contour lock system as used on the battery distribution system.

Cat. No. BEP-720
Weight 3 lbs

Heavy Duty Double Pole Battery Switch, 400A Contin
720-DP Double pole battery switch Is a welcome addition to the BEP battery switch range.

Cat. No. BEP-720-DP
Weight 1 lbs

Heavy Duty Selector Switch 721
The 721 Battery Selector Switch is our heavy duty selector switch. Housed in the same module as the 720, it includes the same removable plates and back cover .......

Cat. No. BEP-721B
Weight 3 lbs

Intercell Connector Battery Shrouds
Maintains effective clearance between vent caps and other battery top elements

Cat. No. FS-C
Weight 1 lbs

Mini battery selector switch
The 701-S is the most compact selector switch available on the market.

Cat. No. BEP-701S
Weight 1 lbs

Motorised Battery Switch-275AMPS
Battery switch can be mounted alongside battery, reducing cable lengths and cable sizes to starter motor. (Large cost saving in copper cables).

Cat. No. BEP-701-MD
Weight 2 lbs

Motorised Battery Switch-500AMPS
Remote operation (easier access for battery control).

Cat. No. BEP-720-MDO
Weight 3 lbs

Newmar Battery Isolators
These heavy duty isolators allow charging multiple batteries automatically from one or two alternators, and prevent discharge or 'dumping” of one battery into another.

Cat. No. NM-BI
Weight 1 lbs

Pro Installer 400A Double Pole Battery Switch - MC10
400A Double Pole Battery Switch - MC10

Cat. No. BEP-770-DP
Weight 1 lbs

Pro Installer 400A Dual Bank Control Switch - MC10
400A Dual Bank Control Switch - MC10

Cat. No. BEP-772-DBC
Weight 1 lbs

Pro Installer 400A EZ-Mount Battery Selector Switch (1-2-Both-Off)
400A EZ-Mount Battery Selector Switch (1-2-Both-Off)

Cat. No. BEP-771-S-EZ
Weight 1 lbs

Pro Installer 400A EZ-Mount On/Off Battery Switch
400A EZ-Mount On/Off Battery Switch

Cat. No. BEP-770-EZ-B
Weight 1 lbs

Pro Installer 400A On/Off Battery Switch
Pro Installer 400A On/Off Battery Switch

Cat. No. BEP-770
Weight 1 lbs

Pro Installer 400A Selector Battery Switch
400A Selector Battery Switch - MC10

Cat. No. BEP-771-S
Weight 1 lbs

Pro Installer 400A Selector with Field Disconnect Battery Switch
400A Selector with Field Disconnect Battery Switch

Cat. No. BEP-771-SFD
Weight 1 lbs

Quick Battery Tester
The pocket-sized XC822-TEST Quick Battery Tester quickly assesses your 12-Volt battery and alternator's health.

Cat. No. XC822-TEST
Weight 1 lbs

QuickCote, Anti-Corrosion Protectant
QuickCote offers a complete acid neutralizing coating, formulated especialy for battery terminals and exposed electrical connections.

Cat. No. AEE-QC-46.0195
Weight 1 lbs

Remotely Activated Emergency Parallel Switch 12/24V 500A/2500A
Remotely Activated Emergency Parallel Switch 12/24V 500A/2500A

Cat. No. BEP-720-MDO-EP
Weight 1 lbs

Single Recessed Mounting Plate for 701
This single recessed mounting plate for 701 switches is supplied with all the mounting hardware and comes in a matching grey finish.

Cat. No. BEP-BSP-1
Weight 0.5 lbs

Terminal Protector Battery Shrouds - (Leadhead Shrouds)
Produced with corrosion resistant Polypropylene Copolymers

Cat. No. FS-TOBS
Weight 1 lbs

Vent Power-12/24 or 48 Volt
Zepher Power Vent Battery Box Vent 12, 24 and 48 Volt

Cat. No. Power Vent
Weight 5 lbs

Water Rite Battery Filler
Water Rite Battery Watering Gun Make PURE water from plain tap water!

Cat. No. WR-200G
Weight 2 lbs

Water Rite Wall Mounted Deionizer Kit
The Water Rite Deionizer makes pure water directly from available tap water.

Cat. No. WR-DKIT
Weight 4 lbs

Wireless Remote Control Kit
Wireless Remote Control Kit for 701-MD and 720 Size Battery Switches

Cat. No. BEP-80-911-0045-00
Weight 0.5 lbs

 Created by WebCatalog Creator

©SL Enterprises All rights reserved