Intellitec Dual Thermostat Cat No: MT00-00597-000

$147.00

The Control Module performs the timing, sequencing, switching, and load shedding functions for the furnace/s, air conditioner fans and compressors. It is often located under the refrigerator. The circuitry in this module decodes the control signals sent to it via the multiplexed communication link from theECCThermostat. The Control Module operates the furnace/s by closing a set of relay contacts. The relay contacts for the front furnace are connected to pins 1 and 2 of connector J4, and the contacts for the rear furnace are connected to pins 4 and 5 of the same connector. The relay contacts are electrically isolated from all other circuitry on the Control Module. The contacts are functionally equivalent to the contacts on a wall mounted thermostat and are wired to the blue and black thermostat leads from each furnace. The coach may be equipped with one, or two furnaces. On coaches equipped with one furnace, the furnace should be wired to pins 1 and 2 of connector J4. Model: 00-00597-000 Dual Termostat 00-000597-100 Electonic Climate Control