Drilmar™ 90 Insulated Multiconductor Cat No: EE-DIM

Multiconductor Power/Distribution Cable Type T/N, 600 Volts Drilmar™ 90 Insulated Drilling Rig and Marine Cable APPLICATIONS These cables are specifically designed for the installation and use in marine environments, for use on offshore drilling rigs, aboard marine vessels and on fixed and floating offshore facilities. These cables are used for the distribution of power in circuits rated for 600 V, and may be used in lighting, communication, control , and electronic application. STANDARDS IEEE-45-1998: Recommended Practice for Electrical Installations on Shipboard Cables UL 1309-1995: Marine Shipboard Cable CSA C22.2 No. 245: Marine Shipboard Cables IEEE 1580-2001: IEEE Recommended Practice for Marine Cable for use on Shipboard and Fixed or Floating Platforms SPECIFICATIONS / ENGINEERING INFORMATION Unarmored Design: Conductor: Uncoated soft or annealed Class B stranded copper per IEEE-45-1998, IEEE 1580-2001 and UL 1309 / CSA C22.2 No. 245 Sizes: 14 AWG up to 750 kcmil. Insulation: Flame-retardent polyvinyl chloride and polyamide nylon covering (VNTC) per IEEE-45-1998, IEEE 1580-2001 and UL-1309-1995/CSA C22.2 No. 245. Also meets and exceeds the requirements of IEC 92-353 for thermoplastic insulation. Conductor Identification: Color-coded insulation in accordance with 8.5 per IEEE-45-1998 and 3.6 per UL 1309-1995/CSA C22.2 No. 245. See Table 1 Assembly: Individual conductors cabled with moisture and flame resistant fillers as required, with a suitable cable tape applied over the assembly, to give the completed cable a substantially circular cross-section. Jacket: Flame-retardent and sunlight resistant polyvinyl chloride (PVC) jacket, per IEEE-45-1998, IEEE 1580-2001 and UL-1309-1995/CSA C22.2 No. 245. Also meets and exceeds the requirements of, and IEC 92-353 for thermoplastic insulation. Armored Design: Unarmored Design (see above description) plus bronze, Aluminum or Tin Coated Copper Braid, per IEEE-45-1998, IEEE 1580-2001and UL-1309-1995/CSA C22.2 No. 245 without an overall sheath. Armored and Sheathed Design: Armored Design (see above description) plus Sunlight resistant and Flame-retardent polyvinyl chloride (PVC), per IEEE-45-1998, IEEE 1580-2001 and UL-1309-1995/CSA C22.2 No. 245. Request price: