BZ Battery Meter 12, 24 & 48 VDC Selectable Cat No: 102MTRSLPM10SEL

$61.70

BZ Battery Meter 12, 24 & 48 VDC Selectable The LPM-10 Battey Meter displays the relative battery charge in 10 step increments from 10% to 100%. Ten LEDs indicate the battery's state-of-charge at a glance. The 100% LED corresponds to battery voltage greater than 12.8(25.6/51.2) volts and the 10% LED corresponds to a battery voltage of 11.0(22.0/44.0) volts. If the battery voltage drops below 11.0(22.0/44.0)volts no display will register. Installation of the LPM-10 is a simple two wire connection (red to positive, black to negative). If a continous display is not required (or desired) a momentary (push button) switch can be installed in the circuit. The LPM-10 is selectable for either 12, 24 or 48 volt battery systems by an internal switch setting. Size 2.8" X 4.65" X1" outside dimensions WarrantyThe LPM-10 is warranted against defects in material and workmanship to the original owner for five years.